|

Synthesis of Active Disturbance Rejection Control

Authors: Alhelou M., Gavrilov A.I. Published: 18.12.2020
Published in issue: #4(133)/2020  
DOI: 10.18698/0236-3933-2020-4-22-41

 
Category: Informatics, Computer Engineering and Control | Chapter: System Analysis, Control, and Information Processing  
Keywords: general disturbances, estimator, tracking differential, nonlinear state error feedback

Synthesis of Active Disturbance Rejection Control (ADRC) has been discussed in this work. Two main approaches have been presented for the second-order ADRC: Linear ADRC and nonlinear ADRC. A design procedure for the three main components of ADRC: controller, estimator, and disturbance rejection scheme has been presented in each approach. Parameters of the linear approach are tuned using the desired closed loop system bandwidth. Parameters of the nonlinear approach are selected by categorizing them first into usual parameters and key parameters. After that, the key parameters are optimized using Genetic Algorithm (GA). The two approaches have been tested on a quarter-car system that deals with the passenger comfort problem. Simulation results show a good performance and a good compensation for external disturbances and dynamic uncertainties

References

[1] Qing Z., Gao Z. On practical applications of active disturbance rejection control. Proc. 29th Chinese Control Conf., 2010. Available at: https://ieeexplore.ieee.org/document/5572922

[2] Qian L., Li D., Tan W. Design of multi-loop ADRC controllers based on the effective open-loop transfer function method. Proc. 33rd Chinese Control Conf., 2014. DOI: https://doi.org/10.1109/ChiCC.2014.6895546

[3] Xue W., Bai W., Yang S., et al. ADRC with adaptive extended state observer and its application to air--fuel ratio control in gasoline engines. IEEE Trans. Ind. Electron., 2015, vol. 62, no. 9, pp. 5847--5857. DOI: https://doi.org/10.1109/TIE.2015.2435004

[4] Li F., Zhang Z., Armaou A., et al. Study on ADRC parameter optimization using CPSO for clamping force control system. Math. Probl. Eng., 2018, vol. 2018, art. 2159274. DOI: https://doi.org/10.1155/2018/2159274

[5] Zhu E., Pang J., Sun N., et al. Airship horizontal trajectory tracking control based on active disturbance rejection control (ADRC). Nonlinear Dynamics, 2014, vol. 75, pp. 725--734.

[6] Li X., Wang S., Wang X., et al. Permanent magnet brushless motor control based on ADRC. MATEC Web Conf., 2016, vol. 40, art. 08003. DOI: https://doi.org/10.1051/matecconf/20164008003

[7] Gao Z., Tian G. Extended active disturbance rejection controller. Patent US 8180464. Appl. 20.08.2008, publ. 01.01.2009.

[8] Peng C., Tian Y., Bai Y., et al. ADRC trajectory tracking control based on PSO algorithm for a quad-rotor. ICIEA, 2013, pp. 800--805. DOI: https://doi.org/10.1109/ICIEA.2013.6566476

[9] Han J.Q. From PID technique to active disturbance rejection control technique. Control Engineering of China, 2002, vol. 9, no. 3, pp. 13--18.

[10] Wang Ch., Zhang H., Yu Y. USV trajectory tracking control system based on ADRC. CAC, 2017, pp. 7534--7538. DOI: https://doi.org/10.1109/CAC.2017.8244141

[11] Han J. From PID to active disturbance rejection control. IEEE Trans. Ind. Electron., 2009, vol. 56, no. 3, pp. 900--906. DOI: https://doi.org/10.1109/TIE.2008.2011621

[12] Zhou X., Yang C., Zhao B., et al. A high-precision control scheme based on active disturbance rejection control for a three-axis inertially stabilized platform for aerial remote sensing applications. J. Sens., 2018, vol. 2018, art. 7295852. DOI: https://doi.org/10.1155/2018/7295852

[13] Mohite A.G., Mitra A.C. Development of linear and non-linear vehicle suspension model. Mater. Today, 2018, vol. 5, no. 2-1, pp. 4317--4326. DOI: https://doi.org/10.1016/j.matpr.2017.11.697

[14] Madonski R., Herman P. An experimental verification of ADRC robustness on a cross-coupled aerodynamical system. IEEE Int. Symp. Industrial Electronics, 2018, pp. 859--863. DOI: https://doi.org/10.1109/ISIE.2011.5984271

[15] Zhou Q. Research and simulation on new active suspension control system. Master Thesis. Lehigh University, 2013.