|

Reference Voltage Generator for 12-Bit Pipeline ADC with 100 MHz Sampling Frequency

Authors: Fokin Yu.M. Published: 14.02.2017
Published in issue: #1(112)/2017  
DOI: 10.18698/0236-3933-2017-1-100-108

 
Category: Instrument Engineering, Metrology, Information-Measuring Instruments and Systems | Chapter: Telecommunication Systems, Networks and Devices  
Keywords: analog-to-digital converter (ADC), reference voltage, reference voltage generator, integrated circuit, operation range, gain error, distortions, circuit simulation, temperature stability

The work examines the electrical circuit of a voltage reference generator for the pipeline analog-to-digital converter (ADC). This circuit possess high accuracy of reference levels formation, good temperature stability and it is low-sensitive to supply voltage deviations. The main feature of the circuit is that it uses two independent resistive dividers in the form of matrices and specialized buffers to decrease reference voltage distortions on load. This paper gives simulation results of the voltage reference generator on load. We obtained dependences of reference voltages on temperature and supply voltage and took measurements of prototype models.

References

[1] Nikamin V.A. Analogo-tsifrovye i tsifro-analogovye preobrazovateli [Analog-to-digital and digital-to-analog converters]. Sankt-Petersburg, KORONA print Publ., Moscow, Al’teks-A Publ., 2003. 224 p.

[2] Waltari M., Halonen K. Reference voltage driver for low-voltage CMOS A/D converters Electronics. Circuits and Systems: The 7th IEEE International Conference. Jounieh, December 2000, vol. 1, pp. 28-31.

[3] Xiaobo C. A 12 bit 100 MS/s pipelined analog to digital converter without calibration. Journal of Semiconductors, November 2010, vol. 31, no. 11. Available at: http://iopscience.iop.org/article/10.1088/1674-4926/31/11/115007

[4] Van der Wagt J.P., Chu G.G., Conrad C.L. A layout structure for matching many integrated resistors. IEEE Transactions on Circuits and Systems I: Regular Papers, 2004, vol. 51, no. 1, pp. 186-190. Available at: http://ieeexplore.ieee.org/document/1259502 DOI: 10.1109/TCSI.2003.821303

[5] Ahmed I. Pipelined ADC design and enhancement techniques. New York, Springer Science and Business Media, 2010. 200 p.

[6] Savengsveksa V., Heedley P., Matthews T., Ahmad K., Negrete J. An 8-b 20-Msample/s pipelined A/D converter in 0.5 pm CMOS with 7.8 ENOB. IEEE Midwest Symposium on Circuits and Systems, Covington. 2005. Available at: http://ieeexplore.ieee.org/document/1594124 DOI: 10.1109/MWSCAS.2005.1594124

[7] Ohnhauser F. Analog-digital converters for industrial applications including an introduction to digital-analog converters. Berlin, Springer-Verlag, 2015. 333 p.

[8] ADS6124 Data Sheet. Texas Instruments: company website. Available at: http://www.ti.com/lit/ds/symlink/ads6124.pdf (accessed 09.06.2016).

[9] AD9433 Data Sheet. Analog Devices: website. Available at: http://www.analog.com/media/en/technical-documentation/data-sheets/AD9433.pdf (accessed 09.06.2016).

[10] LTC2253/LTC2252 Data Sheet // Linear Technology: website. Available at: http://cds.linear.com/docs/en/datasheet/22532fa.pdf (accessed 09.06.2016).